Metals Remover No More Metal | Lo-Chlor

Metals Remover 'No More Metal', manufacturer: Lo-Chlor

Package: 1l.

Can be used in all types of pool finishes.
Sequesters (isolates and holds in solution) metals in the water and removes them from the pool by filtration.
Ideal for the start-up of new and re-surfaced pools.

No More Metal is a superior metal sequestrant designed to remove dissolved metals from pools, hot tubs and spas.

It MUST be used for all stain removal treatments.

Most stains are the result of incorrectly balanced water.

General Instructions:

Stain Treatment & Prevention:

• Water must be correctly balanced. Unbalance water is the cause of most stain and scale problems.
• Ensure the pump and filter are running as normal.
• Follow the dose rate below and add the required dose to the pool water. Allow pool water to filter for a minimum of 12 hours after treatment.
• Use a double dose for severe staining.
• Continued use of this product helps prevent staining from returning.

Initial Fill Of New Pools:

Mix 50ml in a clean plastic bucket of water and add to the pool for every 5,000 litres of pool water.

Repeat this procedure as the pool is filling.

Dose Rates:

Stain Treatment & Prevention – 500mls per 50,000 litres (11,000 gallons) of pool water.
Initial Fill of New Pools – 50ml per 5,000 litres (1,100 gallons) of pool water.

N.B. Pools should not be shock treated within 48 hours of the addition of No More Metal. This product must be used alongside Multi Stain Remover in all stain treatments to ensure released metal ions are sequestered, otherwise repeated staining may occur